Winter Precaution and measure for Ultra-high pressure Water blasting machine Pump

Winter Precaution and measure for Ultra-high pressure Water blasting machine Pump

In Winter days, to ensure normal operation and maintenance of the Ultra-high Pressure Water Jet Blasting cleaning machine Triplex Pump, it requires the special attentions and precaution to some specific matters, some points as follows need to be note and carry out:

1: Starting and running the Ultra-high small Pipeline Heat Ex-changer hydro Jet blasting cleaning pump:

In winter, the outdoor temperature may be very low, so the Ultra-high Pressure Water Jet Blasting cleaning machine Triplex Pump should be preheated before starting. The driving Unit of the Hydro water Jet Blasting pump should be started first. When the Ultra-high hydro Jet  cleaning pump’s bearing gears and other transmission Unit are fully lubricated, the Water Jet cleaning machine pump inlet and outlet valves should be opened to allow The pump starts working.

2:Water Jet Surface industry cleaning machine Pump maintenance

Winter is a period of high incidence of faults, so equipment inspections and maintenance should be strengthened. The operating status of the pump should be checked frequently, the wear of bearings and gear transmission components should be checked, and problems should be discovered and solved in a timely manner.

3: Antifreeze of Ultra-high Pressure Water Jet Blasting cleaning machine Triplex pump

The temperature is low in winter and liquids tend to freeze easily. For 20000psi Pressure Water Jet Tube cleaning machine pumps exposed outdoors, anti-freeze measures should be taken, such as adding an insulation layer or adding anti-freeze valves to the inlet and outlet valves of the pump.

4: water blasting cleaning machine Pump cleaning

Due to the low outdoor temperature in winter, some impurities and dirt may be deposited inside the Ultra-high Pressure Water Jet Blasting cleaning machine Triplex pump. Therefore, the inside of the hydro jet pump should be cleaned in time after the pump stops running.

5:Water blasting Ship Surface cleaning parts machine Pump safety:

The dry weather in winter can easily cause fires, so during operation, safety regulations must be strictly observed to avoid fire sources.

6: Maintenance of power supply and motor

In winter, due to temperature changes, the power cord and motor circuit may shrink and expand, causing poor contact or short circuit. Therefore, it is necessary to regularly check the power cord and circuit lines, diesel engine starting device, oil pressure, and antifreeze, and replace aging wires in a timely manner. and diesel engine oil and antifreeze.

The above are the main precautions measures for hydro Jet high-pressure piston pumps in winter. Following these precautions can ensure the normal operation of the Water Jet Blasting pump in winter and extend the service life of the pump.

Shenzhen Panwin Machinery & Equipment Co.Ltd is a professional manufacturer in the field of water jet cutting and Hydro Jet blasting parts.We supply you with excellent quality products water-jet blasting machine  compatible with such as Jetstream WOMA etc.